|
| |
The pocket size rear wheel stand for motorcycle sport
bikes
by SJL Products
|
The Problem -
Motorcycle manufacturer's have
reduced the weight and improved ground clearance by removing the center stand
from today's cutting edge sport bikes. These changes have improved the ride for
sport bike riders but has made chain maintenance a more difficult chore. Not
having a stand to support the rear wheel can turn chain lubrication into a long
walk across the parking lot, pushing and oiling as you go. Not much of a problem
if you are home in the garage with your full size swingarm stand but what do you
do when you're out on the road away from home? |
|
The Solution - Quick Stand
is a portable motorcycle rear wheel support that's small enough
to carry on your bike. It allows you to raise the rear wheel off the pavement so
it can be rotated while you lube your chain, check tire condition or repair a
leaking tire (plug type repair). It takes up the same amount of space as a pair
of sunglasses and weighs only 6-1/2 ounces. In the words of one reviewer......"very
trick"! |
HOW IT WORKS
 |
After parking your bike on a hard
level surface remove Quick Stand from it's
Cordura storage case and snap it together. Attach the velcro brake lock
strap to the front brake lever to lock the front wheel. |
 |
 |
Using the spring-loaded feature ,
attach it to the swingarm spool on the right hand side of the bike (your
bike must be fitted with spools in order to use Quick
Stand). |
 |
Standing on the same side of the
bike, rock the bike from side to side with a slight lifting motion. Grabbing
the foot pegs is a convenient way to do this. As you rock the bike, use your
foot to nudge the lower end of Quick Stand
towards the rear tire. |
 |
You'll find that your rear tire has
been lifted clear of the pavement and is now supported in this position. The
entire process takes less than 30 seconds to complete. You now have two free
hands to rotate the rear wheel and apply chain lube, check tire condition,
plug a flat tire, add air or even clean the wheel. When you're done using
Quick Stand, unsnap the tube sections and put in back into it's Cordura
case. It's small enough to be easily stored under under your motorcycle's
seat or in the tail section. |
PRODUCT REVIEWS & USER
FEEDBACK
Read the latest Quick Stand review online at
Dragbike.com, February 2001.
Quick Stand was selected "innovation of the month" (July
2000) by 
magazine tested Quick Stand and rated it 4 Stars (out of 5). "Sportbike
owners rejoice: Here's a smart idea that -- with practice-- works well." (August
2000) |
3/25/00, Email from Roberto (Miami, FL)
Subject: SATISFIED CUSTOMER
I received my Quick Stand yesterday and after work went straight to the
garage to try it out and it worked "JUST AS ADVERTISED" GREAT ! Quality, workmanship
and instructions were EXCELLENT. This is just what I wanted for those long trips.
Thanks for the help and take care.
Ride Safe, RJ
 |
Carl L. used
Quick Stand on his ZX9 during a grueling 10 state, 6,000 mile
trip through the western U.S. and Rocky Mountains. "It worked great. I used
Quick Stand twice each day during the 16 day trip. Some days we covered well
over 400 miles. Taking care of the drive chain was important. We were
usually a long way from the nearest bike shop and couldn't afford to have a
chain problem.". |
Quick Stand - PRODUCT FEATURES &
SPECIFICATIONS:
All major parts constructed of aircraft grade aluminum
Billet machined end supports
Weighs only 6-1/2 ounces
Spring loaded cable loop allows Quick Stand
to self attach to swingarm spool
Stores in it's own Cordura case about the size of a pair of sunglasses
Includes velcro front brake lock strap
APPLICATION INFORMATION
|
Quick Stand Model QS1 has been designed to work with the
following motorcycles: Aprilia Models: RSV Mille, SL1000, Falco 1000. Honda:
Model RC51 ('00 & '02), CBR600RR, CBR954RR, CBR1000RR. Kawasaki Models: ZX6R, ZX7R, ZX9R, ZX12R, ZRX1100,
ZRX1200. Suzuki Models: GSX1300R Hayabusa, GSXR600, GSXR750 ('90 & up),
GSXR1000, GSXR1100 ('90 & up), RF600R, RF900R, TL1000S, TL1000R, SV650,
SV650S, SV1000, SV1000S, Vstrom. Yamaha
models: YZF750, YZF1000, YZF-R6, YZF-R1. May also be compatible with other
motorcycles having spools located at the lower edge of the swingarm. |
| If your bike is not equipped with
spools try our own high quality aluminum spools complete with stainless
steel hardware (stainless on SSS8 only). |
 |
Price List (please go to our "Products"
page to select items for on-line ordering)
| Part No. |
Description |
Price |
|
| QS1 |
Quick Stand
complete with carrying case, velcro brake lock strap and
instructions |
$39.95 |
|
| SSY6 |
Swingarm Spool Kit (see application
chart below) |
$21.95 |
|
| SSS8 |
Swingarm Spool Kit (see application
chart below) |
$21.95 |
|
| SSK10 |
Swingarm Spool Kit (see application
chart below) |
$21.95 |
|
| SSK10A |
Swingarm Spool Kit (see application
chart below) |
$21.95 |
|
| SSK12 |
Swingarm Spool Kit (see application
chart below). |
$21.95 |
|
Spool Application Chart
|
Make/Model |
Year |
Spool kit Part number |
| Aprilia RSV Mille S & R, SL1000, Falco, Tuono |
'00 & up |
SSY6 |
| Honda RC51 |
'00, '02 & up |
SSS8 |
| Honda CBR600RR |
all |
SSS8 |
| Honda CBR954RR |
all |
SSS8 |
| Honda CBR1000RR |
all |
SSS8 |
| Kawasaki ZRX1100, ZRX1200R |
all |
SSK10 |
| Kawasaki ZX6R, ZX6RR |
98 & up |
SSK10 |
| Kawasaki ZX9R |
94-97 |
SSK12 |
| Kawasaki ZX9R |
98 & up |
SSK10 |
| Kawasaki ZX10R |
all |
SSK10 |
| Kawasaki ZX12R |
all |
SSK10A |
| Kawasaki ZX7R |
all |
SSK12 |
| Kawasaki ZX6R |
95-97 |
SSK12 |
| Suzuki GSX1300R, GSXR1000 |
all |
SSS8 |
| Suzuki RF, TL |
all |
SSS8 |
| Suzuki GSXR750 |
'90 & up |
SSS8 |
| Suzuki GSXR600 |
'96 & up |
SSS8 |
| Suzuki GSXR1100 |
'90 & up |
SSS8 |
| Suzuki SV650, SV650S |
all |
SSS8 |
| Suzuki SV1000, SV1000S |
all |
SSS8 |
| Suzuki Vstrom |
all |
SSS8 |
| Yamaha YZF750 |
all |
SSK10 |
| Yamaha YZF1000 (except R1) |
all |
SSK10 |
| Yamaha YZF-R1 |
all |
SSY6 |
| Yamaha YZF-R6 |
99-00 |
SSY6 |
Copyright
ã
2000-2008 SJL Products, Inc., Jefferson, MA
BACK TO TOP
|
